Precisioneering DKG | Products - Safety Gates
*Safety Gates only for sale in Canada         
Safety Gates
The new and improved Universal Double Bar Safety Gate (UDG) replaces the need to have both Left and Right Double Bar Gates, which makes the ordering and storing of the gates much simpler. The Single Bar Gate is no longer available.
DESIGN

•  Gate automatically closes due to gravity
•  Rises when opened; returns closed when released
•  Design does not depend on springs, cams, bearings, or the operator
•  Has a horizontal swing, not a vertical drop
•  Available in 4 standard sizes:
   22” / 560mm           27” / 690mm
   32” / 820mm          37” / 950mm

MATERIAL STRENGTH & WEATHERABILITY

•  Withstands 400 lb (180 kg) impact test at ambient, as well as
   extreme cold temperatures (-70ºF / -56.7ºC)
•  Excellent outdoor weatherability; supports heavy loads 24/7
•  In sunlight, material will surface discolor but not degrade
•  No loss of tensile strength after 9 months in Arizona and Florida
   UV-exposure tests

CONSTRUCTION

•  All molded parts are made from a strong, rigid, UV-resistant
   polyurethane
•  Molded parts colored throughout with safety yellow
•  Fluoropolymer wear plate and bushings facilitate easy open & close
•  Galvanized hardware provided

EASY INSTALLATION

•  Universal hinge design provides either left-hand or right-hand swing
•  Universal hinge design will attach to most common guardrails
•  For angle iron, flat bar, or plate installation:
   2 bolts for hinge and 1 bolt for block
•  For pipe or square tube:
   Add-on installation kits are available
bullet Contact Precisioneering
To request the UDG Safety Gate Brochure, which includes
installation instructions and available add-on installation kits.

WIDESPREAD SUCCESS

•  Proven design has been successfully used for over 30 years
•  Sold more than 500,000 units in over 60 countries and 50 US states
•  Specified by many multi-national industrial companies
•  Recommended by many engineering firms
•  Exceeds US OSHA and other worldwide safety standards

BENEFITS

•  Safe & effective
•  Maintenance free
•  Long service life
•  Proven design
•  Provides the protection you want
•  Economical

UDG Safety Gate Design Considerations
The Universal Double Bar Safety Gate attaches easily to:
 
INTREPID UDG-37 MAXIMUM SWING ROTATION, RISE, AND KICK-OUT
DESIGN CONSIDERATIONS WHEN GATE IS IN A TIGHT AREA

When the Safety Gate is to be mounted in a tight space, such as a corner or a narrow catwalk area, the designer must be aware of both the rise and the kickout caused by the swing rotation of the self-closing gate. This is depicted in these two drawings.

INTREPID UDG-37
Maximum Rise = 14 / 356 mm

UDG-37 Maximum Rise

INTREPID UDG-37
Fully Open = 112 degrees

UDG-37 Fully Open

Please allow as much room as possible so that the gate can swing fully open. However if space is tight, then try to provide at least a 4" - 6" corner so that the gate can swing open as much as 75º - 90º.