|
|
|
| |
MANWAY
ENTRIES
|
| TOP
ENTRY MANWAYS
Utility and Hinged manways are designed for atmospheric pressure
and tanks that have a few inches W. G. negative ventilation
pressure. If manway covers are required to contain gas pressure
developed during filling, additional fasteners are required.
Precisioneering has several 24" manway designs. The two used
most often are shown here. |
|
HINGED
BOLTED
10 PSI Pressure Tight |
 |
SIDE
ENTRY MANWAY
Side entry manways are considerably more expensive than top
entry. They are a good investment if the tank must be entered on a
regular basis. Precisioneering's design approach treats the
installation of a manway similar to the installation of a large
nozzle under Section Eight of The Boiler Code, wherein, all material
removed is replaced around the hole in a manner that all stresses
are carried around the manway. Manways are rated at 10 psi minimum. |
|
For more information, please contact us at sales@precisioneering.com
1-800-465-1800 • 416-751-9200
303 Nantucket Blvd., Scarborough, Ontario, Canada M1P 2P2 |
