Centrifugal Fans

THREE IMPELLER STYLES:
LPRT.gif (4498 bytes)

MODEL LPRT [Low Pressure, Radial Tipped]

  • For low static pressure requirements up to 8" wc, volumes up to 76,000 cfm.
  • Wheel blades are forward curved radial tipped for higher efficiency
  • Blades are designed with a strong, short load span to accommodate sudden volume fluctuations.

 
LPBI.gif (3939 bytes)

MODEL LPBI [Low Pressure, Backward Inclined]

  • For low static pressure requirements up to 8" wc, volumes up to 76,000 cfm.
  • Wheel blades are backward inclined to provide a non-overloading characteristic
  • Blades are wide to provide the same static pressure and volume performance as model LPRT
  • Backward inclined design causes horsepower to rise to peak efficiency as volume increases, after which horsepower and pressure decrease as volume increases further, providing the non-overloading feature.

 
HPRS.gif (4364 bytes)

MODEL HPRS [High Pressure, Radial Straight]

  • For high static pressure requirements up to 28" wc, volumes up to 100,000 cfm
  • Wheel blades are straight and held firmly in position by a center cone and a conical end ring to provide the strength required for high pressure performance.
  • Straight blades have excellent self-cleaning characteristics.
  • May be used where dust or other solids are in the air stream.

 

 

 

For more information, please contact us at sales@precisioneering.com

1-800-465-1800 • 416-751-9200

303 Nantucket Blvd., Scarborough, Ontario, Canada M1P 2P2