Precisioneering  | fiberglass fabricating for the future
Level Guages
There are many ways to see how much liquid is in a tank. All methods can incorporate a scale stenciled on the side of the tank.

     • Float Gauge     • Sight Glass (Clear Rigid PVC)

Bottom Drains
The most common and least costly method of draining is to locate a flanged nozzle as close to the bottom as possible. This results in the flange face being located 1/2" above floor, or base level. When a pump is connected in line with an elevated drain a siphon can be used. If full drainage is required a base with a cutout must be provided.

     • Close     • Siphon     • Full
 
     Other Tank Equipment